3 thoughts on “how to package wholesale jewelry How to clean the ring”

  1. wholesale ring jewelry women supplier How to clean the ring

    This cold water immersion method

    Aronia water used in half a cup of family, add water of the same capacity, and immerse diamonds in the solution about three Ten minutes, then gently wash the inlaid metal around the diamond jewelry with small wipes, and then put it in the solution gently. Take it out and wash it with paper without rinse.

    The warm water immersion

    (1). Add a mild cleaner to warm water and soak the diamond ring.

    (2). If necessary, use a soft brush to remove dust.

    (3). Put the ring in a mixed solution and clean it, and then rinse it thoroughly under the flowing warm water. When rinse, remember to block the drain or place the diamond in the filter to avoid loss.

    (4). Use a cotton soft cloth to dry the diamond ring.

    This with soapy water

    The first step: make a solution with soap and water. Squeeze some detergent in the bowl, then pour warm water to stir the solution to make some foam. Softening, it is best to be a natural cleaning agent, so as to avoid the chemical component damage ring of detergent. You can also use soft handwashing, fragrance, or shower gel. Make sure not to use soap containing "moisturizers", or you may leave a layer of film on the ring.

    Step 2: Put the ring in a bowl for 15 minutes. Let soap and water soak the ring. The soapy water will penetrate and disintegrate the gray, dust, and stains on the ring.

    The third step: take out the ring to check. If you can still see stains, you need to clean it further. Conversely, you can wash the ring with water.

    Step 4: Gently brush off the dust on the ring with a soft toothbrush. Be sure to use a soft brush brush instead of medium hardness or hard brush so that there will be no scratches on your ring. Gently brush, clean the dust in the gap with a brush. If necessary, you can use a toothpick to help clean up the dust in the gap.

    Step 5: Wash the ring with cold water.

    Step 6: dry the ring. Put the ring on a paper towel or clean cloth to completely dry it.

  2. hypoallergenic wholesale jewelry How to clean the ring
    n00:00 / 00: 4870% shortcut keys to describe space: Play / pause ESC: Exit full screen ↑: increase volume 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description

  3. wholesale jewelry ontario canada Pay content for time limit to check for freenAnswer 1. Reagion that can be used to use the appearance powder powder powder that can show the original pattern after exposure. Use it to brew the platinum ring. 2. If the cool body powder is not very dirty, just lose some gloss, then use the baby's cool body powder to wipe and rub your own platinum ring. When the ring appears the original gloss, rinse the cool body powder flushed Clean. 3. Use toothpaste. If there are long -term dirt on the platinum ring, you can use toothpaste to remove it. Squeeze the toothpaste on a clean cotton cloth, apply the platinum ring evenly with toothpaste, and wipe it back and forth, so that the dirty organs accumulated for many years and even sweat can be removed well.

Leave a Comment